Two major mistakes in mobile phone battery maintenance & four notes

Myth 1: The charging time must be more than 12 hours, repeated three times in order to activate the battery.

This statement is very wrong. The above statement is for nickel batteries, but currently the mobile phones use lithium batteries.

For excessive charging and excessive discharge, lithium batteries, especially liquid lithium-ion batteries, can cause great damage. Because charging is best done according to the standard, and to avoid charging for more than 12 hours.

Myth 2: Activation of the mobile phone battery .

At present, the mobile phone batteries sold are all activated by the manufacturer, so there is no need to activate them. Excessive discharge will reduce the ionic activity. Thereby reducing the service life.

Note 1: Don't be tempted to use a cottage battery.

First of all, be sure to choose the genuine battery of the big manufacturer when buying, try not to use non-original battery and charger. When the battery encounters a problem, it can be turned to the battery manufacturer for repair and replacement.

Note 2: Do not charge for a long time.

Many friends are used to charging at night, and wake up to not know how long the battery has been charged.

Try to avoid charging time of more than 12 hours. Conditions If possible, stop charging when the battery is fully charged to avoid unnecessary damage to the battery.

Note 3: The phone should not be charged when there is no power.

Many friends think that the battery should be completely out of power and recharged so that it is better for the battery.

In fact, it should be charged when the phone prompts that there is no power.

Someone has used the example of automatic shutdown since the warning of the low battery level of the mobile phone is still not used. As a result, the mobile phone in this example did not respond during the subsequent charging and booting, and had to be sent to the customer service for repair. This is actually caused by the battery being over-discharged and the voltage is too low, so that it does not have normal charging and power-on conditions.

Note 4: Pay attention to waterproof and moisture.

The battery should be protected against moisture and falling, avoid storing and charging in a high temperature environment. Try not to call in the state of charge. If you do not use the phone for a long time, remove the battery.

Secondly, when the battery is in the water, don't shut it down immediately, and don't press any keys. This is to prevent water from flowing into the board with the keyboard gap. Instead, you should open the phone cover and remove the battery directly, then set the phone up to allow the water to naturally settle. It is safer to let the phone dry naturally, remember not to expose it to the sun. Some mobile phones will bulge on the surface of the battery due to long-term use or moisture, and the words on the surface of the battery will be blurred. At this time, you should not call for a long time, avoid high-temperature environment, and try to solve the problem of genuine manufacturers.

Shower Room

Geagle Intelligent Sanitary Wares Co., Ltd. , http://www.zhanying-china.com