In the latest report, the global energy market research firm TrendForce's Green Energy Division said that LED outdoor lighting has entered a mature market, and the global market for LED outdoor lighting shipments and market size will grow rapidly.
Analyst Wang Ting said that after years of continuous innovation and improvement, LED streetlight solutions have been fully verified in many cities around the world. After the initial pilot installation, the LED lighting fixtures have been fully verified for their energy saving and environmental protection, and the service life is long. To the level closer to traditional lamps, it is expected that LED outdoor lighting will not only grow rapidly in the year-on-year growth from 2014 to 2017, but also maintain a compound growth rate of 20 or more.
In North America, the largest street light replacement in North America, as of the end of 2013, more than 600 cities in the United States have or are planning to install LED street lights. In addition, most provinces and cities in Canada are actively implementing LED street light replacement plans or Dress up the incentive plan.
The North American outdoor lighting market has matured with the participation of manufacturers. The competitive strategy of manufacturers is mainly to provide cost-effective products, pay more attention to environmental factors, and meet high-end professional needs.
European LED street lighting is fully integrated into the European lighting market. The European streetlight market has always been a B2G oligopolistic market. The product style is small and the supply chain is already quite stable. It is usually dominated by local European brand factories or local manufacturers, and these manufacturers have very good political and business relations and economic scale. . European LED street lights are less sensitive to price than other regions, but the quality requirements are quite stringent.
Japan's LED lighting will benefit from the 2020 Olympic Games. The Japanese government will increase the tax source and reduce the issuance of public debt to achieve the goal of reducing the deficit, reducing the current fiscal deficit of about 50 trillion yen by half. The longer-term goal is related lighting engineering and infrastructure construction of the 2020 Olympic Games. It has been seen that the relevant construction industry has officially started construction. It is planned to introduce LED lighting and OLED lighting to attract international attention. In addition, the signing of the International Mercury Convention will also bring new business opportunities for LED lighting.
China's outdoor lighting growth kinetic energy comes from the LED street lamp modification demand. China's new streetlights have a high consistency with the government's fiscal expansion cycle. In 2009, the Chinese government proposed a 4 trillion yuan (RMB) economic stimulus plan, and the number of newly installed street lamps reached 1.84 million units (YOY 12.17).
Statistics show that in 2013, a large number of bids in Guangdong Province were still concentrated in the six central cities of the Pearl River Delta urban agglomeration with relatively developed economy and relatively strong financial strength. The number has also increased significantly in 12 years. In the field of outdoor public lighting, LED lighting has entered the harvest period. After the replacement, the new demand in coastal cities will slow down. In 2013, the installed capacity of LED street lamps in Guangdong reached at least 300,000 units, and 1H14 will enter the dense installation period of street lamps.
Emerging market LED street light replacement tide started in various emerging markets such as India, Russia, Southeast Asia (Vietnam, Indonesia, Malaysia, Thailand), Latin America (Brazil, Mexico, Argentina, Colombia) and Australia, LED outdoor lighting related policies and changes Equipment projects are receiving increasing attention.
Overall, North America, China, and Europe are still the main demand areas for outdoor lighting, but due to budget cuts and higher penetration rates, the slowdown in growth has emerged. The development of the Latin American market is relatively late. Under the promotion of two major events in Brazil, the outdoor lighting market will usher in a rapid pull-up period.
Introduction of coal jet machine:
Coal pulverizer is also called coal pulverizer. It is a new type of coal saving and coal burning equipment, which can save coal consumption greatly and eliminate the waste of coal powder.
As a new type of coal saving and coal burning equipment, coal injection machine is mainly used for drying, annealing, tempering boiler, steam and so on. The suitable site of the first handsome coal injection machine, such as: Ma steel factory, foundry plant, rolling mill, steel mill, cement plant, boiler plant, etc., can replace the heat energy equipment of fuel, gas and electric power electric heating, thus saving 40-50% energy. The pulverized coal injection machine can greatly reduce the labor intensity of the personnel, reduce the cost and improve the economic benefits.
The coal injection machine has the characteristics of easy ignition, easy control of furnace temperature and stable product quality. The machine has the advantages of simple structure, compact structure, convenient installation and maintenance, reduced labor intensity and reduced energy consumption. First handsome coal spray machine has high thermal efficiency, increase production and energy saving, coal saving 40-50%, no exhaust gas, and production is not affected by the rain weather, it has brought more significant benefits to the factory.
Principle of coal jet machine:
First, the raw coal enters the grinding area of the grinding roller and the millstone, and is grinded into pulverized coal under the roller mill of the grinding roller. The loading force of the grinding roller is an important parameter for the safety and economic operation of the pulverizer. With the increase of the loading force of the roller, the grinding pressure of the roller mill increases, the pulverized coal is finer, the pulverized coal output is increased, the coal particle characteristic coefficient n becomes larger and the consumption of the pulverized coal is reduced, but the equipment vibration of the mill is aggravated, the wear is too fast and the service life of the grinding parts is reduced. The Shuai pulverized coal injection machine has the characteristics of centralized supply, multistage crushing and transportation. It can save 50% coal and meet the requirements of environmental protection. It is a necessary product to reduce the cost and reduce the pollution index. The raw coal is transformed into a very fine powder after a series of comminution processes, and is transported to the furnace by the pressure of the 150 mm water column to achieve the goal of complete combustion.
Coal Injection Machine Series
Coal Injection Machine Series,Pulverized Coal Burner,Pulverized Coal Firing Plant,Pulverized Coal Burner Equipment
Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com