Tianye Plastic Factory successfully achieved 3,100 tons of plastic film production
On February 17th, Tianye Plastics Factory “successfully and vigorously and went all out to achieve the first quarter of the season†plastic film products on the public sign, aloud that as of February 16th, Tianye Plastic Factory Filming Plant to achieve plastic film The production of 3,110 tons has successfully completed two-thirds of the target goal for the first quarter of 2014.
At the beginning of 2014, in order to ensure the realization of new goals and tasks, the party committee of the plant further refined the production targets and tasks, guided by the scientific concept of development, and focused on the main products of plastic film and profile, assisted by building templates and technological innovations. In order to grasp the requirements of the outstanding party members demonstration posts and youth vanguard posts and the economic responsibility system as the measures to guarantee measures, the factory party committee convened special meetings to elaborate the production and operation indicators into the sky with meticulous, elaborate, precise and precise tasks. Decomposition to people, the responsibility is decomposed into positions.
At present, Tianye Plastics Plant's film shop has started 20 sets. The workshop mobilized the young and outstanding backbone forces cultivated in recent years as the masters, with a daily output of 50 tons. The picture shows the plastic tarpaulin of the Tianye Plastic Factory's open storage.
The energy saving of blow molding machines can be divided into two parts: one is the power part and the other is the heating part.
Energy-saving part of the power: Most inverters are used. The energy-saving method is to save the remaining energy of the motor. For example, the actual power of the motor is 50Hz, and you actually only need 30Hz in production to produce enough. The extra energy consumption is in vain. Wasted, the frequency converter is to change the power output of the motor to save energy.
Heating part of the energy: Most of the heating part of the energy-saving is the use of electromagnetic heaters, energy saving rate is about 30% -70% of the old resistor ring.
1. Compared with the resistance heating, the electromagnetic heater has a layer of insulation and the thermal energy utilization increases.
2. Compared with the resistance heating, the electromagnetic heater directly acts on the heating of the material tube, which reduces the loss of heat transfer heat energy.
3. Compared with resistance heating, the heating rate of the electromagnetic heater is more than a quarter faster, reducing the heating time.
4. Compared with the resistance heating, the heating speed of the electromagnetic heater is fast, and the production efficiency is improved, so that the motor is in a saturated state, which reduces the power consumption caused by high power and low demand.
Plastic Blow Molding Machine,Plastic Blowing Machine,Molding Machine For Making Plastic Bottle
Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com