Due to the different molding methods of plastic products, the mold materials used in various molding methods are also different. With the rapid development of the plastics industry, the plastic molding mold manufacturing industry has also been advancing.
The structure of the plastic product mold is relatively complicated. The composition of a mold is used in many parts, and the performance and function of each part are different. At the same time, there are strict requirements on the quality, and it must be rigid. And wear-resistant type, these two are indispensable, this is the basic condition of plastic molding.
The basic requirements are summarized as follows:
(1) has sufficient surface hardness and wear resistance
(2) has sufficient strength and toughness
(3) has good functionality
(4) has good polishing performance
(5) heat treatment becomes smaller
(6) has good corrosion resistance
(7) Good pattern and engraved performance
At present, more and more plastic molding molds use new technologies and new processes such as cold extrusion molding and EDM. Therefore, steel for plastic molding molds is also changing. The molding method of plastic products and the processing method of plastic molding die are different, and the basic performance requirements of steel for plastic molding die and the selection of steel are introduced.
A computerized Metallurgical Microscope or a digital metallurgical microscope is a high-tech product developed by combining optical microscope technology, photoelectric conversion technology, and computer image processing technology together. Metallographic images can be easily observed on a computer. , to analyze the metallographic map, rating, etc., and output and print the pictures.
Metallography mainly refers to the use of optical (metallurgical) microscopes and stereomicroscopes to analyze the material microstructures, low-magnification tissues, and fractures, etc. The branch of material disciplines contains both the microstructure and imaging properties of materials. Quantitative characterization also includes the necessary sample preparation, preparation, and sampling methods. It mainly reflects and characterizes the number, morphology, size and distribution of the phases and the tissue constituents constituting the material, the crystal grains (including possible subgrains), non-metallic inclusions and even certain crystal defects (such as dislocations). Orientation, spatial arrangement, etc.
Features:
1. Adopt the world's best infinity dual color correction and contrast enhanced (ICCS) optical system to provide users with the sharpest images.
2. Using 5 kinds of upper parts and 3 kinds of lower parts and two column combination methods, you can make any flexible combination according to your requirements for material testing and economic cost, and can realize the analysis of transparent materials, opaque materials and fluorescent materials. At the same time, it has a powerful upgrade space to ensure your future testing requirements.
3. The industry's largest model height can reach 380mm, providing you with extraordinary operating space.
4. Close to the user's flexibility, the upgrade of the components of the device does not require professionals, users can complete their own operation.
Metallographic Microscope,Metallurgical Microscope,High Resolution Metallographic Microscope,Non-Contact Metallographic Microscope
Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , http://www.jatentech.com