The coefficient of exothermic coefficient of water efficiency is the mathematical model of the claw heat sink performance. Taking the tube radiator as the research object, taking the unit body analysis, the working condition of the tube radiator can be regarded as the non-contact of water and air flowing through the rectangular straight ribs. The heat transfer of the wall surface is checked. Matching of the Radiator The preferred target for calculating the flow rate of water in the pipe is currently ascribed to a design that satisfies a given requirement and the limit condition has a minimum value.
For a given heat dissipation and the size of the radiator defined in the front structure, there may be several combinations of different heat sink core-type materials, such as wind speed and water flow rate, that meet the heat dissipation requirements. The number of rows may increase, the number of tubes may increase, and the number of tubes may increase. The heat dissipation capacity will increase, but at the same time it will increase the material consumption, wind resistance will increase, while the cooling system power consumption and noise mainly comes from the fan, so this article takes the heat dissipation of the radiator to w and the material consumption to calculate the smallest product The preferred goal is to establish a calculation formula. The relative error of heat dissipation in the computer program flowchart The matching and optimization of the heat sink including the change of parameters The calculation of the performance of the qualified program and the selection of the best solution. These tasks are programmed by the computer. The relative error of the heat dissipation of the application example is appropriate. Adjustable.
The actual operation of the car has a face-up effect. The accuracy of computer program calculations depends on the accuracy of the mathematical model. There is a certain deviation between the mathematical model of this article and the actual problem, but the deviation is not large, and always maintain the same trend. The inspection and analysis of the computer optimization design method for an automobile basically reflects the actual situation and can be used for actual design and analysis of similar models.
There is a category of car Fenders For Japanese Car.The Car Fenders are made of steel,and only for Japanese Car.
we also sell other parts for Renault,especially Automobile Sheet Metal Parts.
If you want Other Auto Parts,please conduct us,we provide many kinds of automobile Sheet Metal Parts.
JUNCHENG AUTO firmly believe quality is first,our products are both of high quality and low price.
The automobile sheet metal parts both of high quality and low price are what we would provide.
Fenders For Japanese Car
Fenders For Japanese Car,Japanese Car Fender
JIANGSU JUNCHENG VEHICLE INDUSTRY CO.,LTD , http://www.junchengautopart.com