Recently, Rolls-Royce said that the company has signed a contract with Marine Alutech Oy Ab of Finland for 28 waterjet propellers for 14 Watercat K13 rapid interceptors (FICs) ordered by the Royal Oman Police.
It is reported that these fast interceptors will be built at the Marine Alutech shipyard in Finland and will be delivered by the end of 2017. Although it has a wide range of operational characteristics, it is particularly suitable for patrol, intercept and rescue in various climatic conditions. The Watercat K13 rapid interceptor will be propelled by a 651 kW diesel engine equipped with two Rolls-Royce 32A3 waterjets. The Watercat K13 fast interceptor will have a maximum speed of more than 50 knots and a full-load range of more than 200 nautical miles.
According to Rolls-Royce, the company's Camewa waterjets will make an important contribution to the operability, efficiency and performance of these high-capacity patrol boats, especially at speeds of more than 50 knots. The efficiency of the Camiva A3 series of waterjets is up to 3% higher than the energy efficiency of various types of waterjets in the early days. In addition, the footprint of the patrol boat is reduced, the weight and life cycle cost are reduced, so Reduce fuel costs and carbon dioxide emissions to make them efficient and effective.
Description:
AWS E7016 Welding Electrodes is a potassium low hydrogen type Carbon Steel Welding Electrodes.It can be used for all postion welding with excellent performances:,small spatters, easy restrike arc, high welding efficiency, fine appearance and slag easy to remove. The weld seam shows a satisfactory plasticity, excellent low temperature toughness and high crack resistance.
Aws E7016 Welding Electrodes Product details:
Diameter: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm
Length: 300mm, 350mm, 400mm, 450mm
Operating Current: AC and DC
Welding Current Range: 70-180A
Application:
AWS E7016 Welding Electrodes is Suitable for welding important carbon steel and low alloy steel, such as 16Mn steel and ships fabricated by A,B,D,E grade steel.
Attention:
a. Welding electrodes should be backed at the temperature of 350℃ for one hour before welding.
b. Before welding, the weld metal must be cleared away impurities, such as rust oil, moisture, etc.
c. Short arc and narrow weld bead are recommended in welding.
Packing:
2.5mm*300mm 2.5kgs/inner box, 8inner boxes/carton=20kgs
3.2mm*350mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
4.0mm*400mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
5.0mm*400mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
AWS E7016 Welding Electrodes
Aws E7016 Welding Electrodes,E7016 Welding Electrode,7016 Welding Rod,E7016 Welding Rod
Dingzhou Jinlong Metal Production Co., Ltd. , https://www.weldingelectrodefactory.com