Refueling "jumping gun" really tricky?

I believe that careful car owners have encountered such a thing when refueling cars, that is, when they refuel, they encounter a "jump shot." This led to the suspicion of a certain owner, that the "jumping gun" will result in a faster fuel metering schedule when refueling. And is the fact really as the owner said? Let's take a look at the explanation of the relevant department.

7_副本1.jpg

In order to clarify the facts, Guangzhou Energy Institute, a subordinate unit of the Guangzhou Municipal Bureau of Quality Supervision, organized an on-site test for this and randomly selected three gas stations. The staff then randomly selected three refuelling guns from each of them. Each of the guns was refueled with normal refueling and “Carton” refueling, and three high-flow and three low-flow inspections were conducted. The experimental results show that the maximum indication error is only four ten-thousandths of an inch, that is, four liters of error per 10,000 liters of refueling, all within the allowable error range (three-and-a-half thousandths) of the fuel metering verification procedures.

Industry experts believe that the refueling gun switch directly relates to the operation of the metering system. It is measured only when it is opened. The refueling pause only controls the refueling machine's meter operation and will not have any material impact on the refueling metering.

8_副本.jpg

Why "Caltun" appears when refueling?

Relevant person in charge of the Guangzhou Municipal Bureau of Quality Supervision said that there are two cases of “Carton” when refueling: First, there are intentional movements when the refueller refuels, and the other is automatic “jumping” the refueling machine. “When the refueller refueled, he found that the oil gun had a fast stop and the refueling speed was fast. There may be a risk that the gas in the tank will be discharged too quickly and the oil will be recoiled. Therefore, it is intended to interrupt it and let the gas continue to refuel after the gas has been discharged or lowered. ”

The quality supervision department introduced that the fuel gun port has a self-sealing (jumping gun) device, which is very sensitive. The purpose is to prevent the oil in the fuel tank from overflowing when refueling. During the refueling, the oil is full and once it comes into contact with the self-sealing device, the refuelling gun will automatically shut off and automatically stop refueling, causing a "jump shot." There is also a kind of "jumping gun" that is not topped up. The tanker is airtight and refueling is based on the oil pressure in the tanker. Oil guns are under pressure and the oil splashes back to the muzzle, causing a "jump shot."

In addition, "jumping guns" are also related to temperature and refueling speed. The temperature is high, the oil in the fuel tank is under pressure, and the fuel pressure is increased too quickly. The oil in the tank is prone to splashes, causing a high frequency of “jump shots”.

It can be seen that the phenomenon of “jumping the gun” when the car is refuelling is a normal phenomenon. When the car owners encountered this situation during refueling, they did not need to worry about the shortage of oil.



Radiator Part Series
1)Further machining work: turning, cutting, milling, grinding, drilling, reaming and threading
2)Surface finish process: polishing, shot blasting, chromate plating, power coated and anodizing
3)OEM and ODM parts range: auto parts, electronic parts, furniture parts, home appliance and other industrial uses
4)Processes: Casting, Deburring, Machining, Surface Treatment, Packing
5)Customer's drawings, specifications and samples are welcome
6)Aluminum Die Casting suitable for communications, auto parts, lamp part series, water pump part series, power tool series, radiator part series, Anti-Static Flooring products and other series products.

JD Advantage
(1) More than 20 years of experience in manufacturing and exporting radiator part series.
(2) OEM and custom-made service for Radiator Parts series.
(3) All kinds of castings can be manufactured according to drawing, sample or specific industry standard.
(4) Strong engineering team makes high quality
(5) The coordinated service (casting, machining and surface treatment) make lower price possible.
(6) Advanced-level equipments.
(7) Full material testing process and quality control system.


Aluminum Die Casting Radiator Parts

Radiator Parts,Die Casting Aluminum Radiator,Aluminum Radiator Parts,Aluminum Die Casting Radiator Parts

Ningbo WEIBO Molding&Machine Co.,Ltd. , https://www.diecasting-manufacturers.com