Correct installation procedure of glass rotor flowmeter

The glass rotor flow meter is used in the installation step.
1, first of all should check its technical parameters such as: measurement range, accuracy level, rated working pressure, temperature and a series of parameters meet the use requirements.
2, in preparation for installation, to remove the top liner in the flow meter protection. And check whether the cone is damaged, the float can not move up and down freely, after determining the normal can be installed.
3. The newly installed pipeline should be flushed before installing the glass rotor flowmeter.
4. Make the minimum value of the rotameter is below and vertically installed on the pipeline without vibration. The angle between the center line of the rotameter and the plumb line should not exceed 5 degrees.
5. Large-diameter flowmeters are relatively heavy. To avoid bending of the pipes, measures such as reinforcement support may be taken when necessary. When installing, it is also necessary to prevent the rotor flowmeter from being subjected to excessive pulling, pressing and twisting force. In order to avoid excessive force to damage the cone.
6. According to different working conditions in use, if necessary, install a filter upstream of the rotameter to prevent impurities from contaminating and jam the rotameter. If the fluid is unstable with pulsating flow, a buffer may be installed to ensure good measurement of the rotameter to eliminate pulsatile flow.
7. After the rotameter is ready to be put into use, it should slowly open the control valve on the pipeline upstream of the flowmeter, and then use the regulating valve to adjust the flow so as not to cause the float to rise sharply to damage the conical tube. In order to ensure the measurement accuracy of the rotameter when it is in use, it is recommended that the flow rate of the measured fluid be selected to be more than 60% of the upper limit of the flow rate of the rotor flowmeter.

CF Chunfeng Motorcycle

CF Chunfeng Motorcycle

CF Chunfeng Motorcycle,Chunfeng Spare Parts,Chunfeng Original Spare Parts,Chunfeng Complete Engine Spare Parts

SONORA MOTOR COMPANY , https://www.sonoramotor.com