Rotor Pump with High Concentration and Two Synchronic Rotators

Two types of investment cast processes: Silica Sol process and the water glass process. 
The Silica Sol process is used to cast complex high quality parts with requirements of a very good surface finish and close dimensional tolerances. 
This process can range from a weight of just a few ounces to approximately 80 pounds. If you are concerned with precision in very small parts, we are especially proficient at very fine detail work including teeth and serrations.
The water glass process is typical of the process in the early stages of investment castings.  It generally is capable of much larger castings than the Silica Sol process, but does not have as good of surface finish or tolerances. The water glass process provides parts that have better surface finish and dimensional tolerances than sand castings.
This process may range in weight from several ounces to approximately 200 pounds.

First article layouts and spectrometer material certifications are provided with all first article samples.
Custom service: A variety of secondary operations can be performed on both types of investment castings. They include heat treatment, machining, plating, painting, polishing and buffing, assembly services and even custom packaging.

Production process:

Machining equipments:




Materials that are available:




Products show:
Packaging & shipping:


Our customers:




Our service:
 

FAQ:

1. Can we get the samples?
Yes, we can supply you the samples for checking our quality within 10-30 days.
2. Can we place a trial order first time?
Yes, we are glad to supply you small trial order, and hope your quantity will be big in future.
3. Can you help us to do the customs clearance of import?
Yes, we can help you to do the customs clearance.
4. What is your lead-time?
With our design, fabrication and manufacturing skills and experience, we can efficiently exceed your expectations and meet the time frame required. However, we guarantee that quality and service are never compromised. Two types of investment cast processes: Silica Sol process and the water glass process. 
The Silica Sol process is used to cast complex high quality parts with requirements of a very good surface finish and close dimensional tolerances. 
This process can range from a weight of just a few ounces to approximately 80 pounds. If you are concerned with precision in very small parts, we are especially proficient at very fine detail work including teeth and serrations.
The water glass process is typical of the process in the early stages of investment castings.  It generally is capable of much larger castings than the Silica Sol process, but does not have as good of surface finish or tolerances. The water glass process provides parts that have better surface finish and dimensional tolerances than sand castings.
This process may range in weight from several ounces to approximately 200 pounds.

First article layouts and spectrometer material certifications are provided with all first article samples.
Custom service: A variety of secondary operations can be performed on both types of investment castings. They include heat treatment, machining, plating, painting, polishing and buffing, assembly services and even custom packaging.

Production process:

Machining equipments:




Materials that are available:




Products show:
Packaging & shipping:


Our customers:




Our service:
 

FAQ:

1. Can we get the samples?
Yes, we can supply you the samples for checking our quality within 10-30 days.
2. Can we place a trial order first time?
Yes, we are glad to supply you small trial order, and hope your quantity will be big in future.
3. Can you help us to do the customs clearance of import?
Yes, we can help you to do the customs clearance.
4. What is your lead-time?
With our design, fabrication and manufacturing skills and experience, we can efficiently exceed your expectations and meet the time frame required. However, we guarantee that quality and service are never compromised.

LINA Extrusion Pelletizer

Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives.

 

LINA Water Strand Pelletizing Machine

LINA's water strand granulating machine adopts twin-screw extruder barrel and modular screw design. According to the processed materials and formula requirements, configurations such as length and diameter ratio, barrel structure, screw arrangement, filter change structure, number and location of exhaust, feeding methods, electrical control can be optimized. LINA rubber and plastic water strand granulator is suitable for kinds of renewable materials, outlet materials, glass fiber, nylon, ABS, high concentrated masterbatch and so on. LINA water pull pelletizer line is currently using the latest technology, its cooling effect is excellent, its pelletizing system is independent, and the outcome particles are even and beautiful.

 

 

 

Advantage of LINA Pelletizing Line

1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.

2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.

3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.

4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.

5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.

6. The hoist adopts automatic return technology to ensure the working efficiency.

7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.

 

Specifications of LINA Extrusion Granulating Line

Name	Mode	Capacity of Kneader	Screw length to diameter ratio	Screw diameter	Dimension
LINA Extrusion Pelletizing Line	LN-10/70	10L	12:01	70mm	2200*1000*1150
	LN-10/75	10L	12:01	75mm	2650*1100*1250
	LN-35/100	35L	12:01	100mm	3800*1090*1690
	LN-55/120	55L	12:01	120mm	3800*1090*1690
	LN-75/135	75L	12:01	135mm	3850*2350*3280
	LN-110/150	110L	12:01	150mm	5100*2000*1500
	LN-110/165	110L	12:01	165mm	5100*2000*1500

Water Strand Extrusion Pelletizer

water cooling strand extruder pelletizer, single screw exturder pelletizing line, single screw pelletizing line, plastic water strand extrusion pelletizer, double screw extruder with water cooling strand

LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com