50Hz 1500rpm Googol Biogas Engine for Generator 160kw-1450kw

Model NO.: JTA, RTA Series
Cooling Way: Water Cooled, Air Cooled, CHP, Cchp
Power Range: 160kw-1450kw
Gas Methane: Biogas CH4:60%, CO2:40%
Certticates: ISO, CE, BV, GOST, SGS, etc
Warranty: 1 Year or 1200 Working Hours
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Gas Train: Ball Valve, Gas Filter, Gas Regulator, Gas Control
Nox Emission: 100% Load Below 500mg/Nm3
Trademark: Googol
Transport Package: Standard
Specification: ISO3046, ISO8528
Origin: China
HS Code: 8502120000
Model NO.: JTA, RTA Series
Cooling Way: Water Cooled, Air Cooled, CHP, Cchp
Power Range: 160kw-1450kw
Gas Methane: Biogas CH4:60%, CO2:40%
Certticates: ISO, CE, BV, GOST, SGS, etc
Warranty: 1 Year or 1200 Working Hours
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Gas Train: Ball Valve, Gas Filter, Gas Regulator, Gas Control
Nox Emission: 100% Load Below 500mg/Nm3
Trademark: Googol
Transport Package: Standard
Specification: ISO3046, ISO8528
Origin: China
HS Code: 8502120000
50Hz 1500RPM Googol Biogas Engine For Generator 160kW-1450kW


Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.


Applied gas:

Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc

Acceptable fuel gas pressure: 5~12kPa

CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%

Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.

Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )

H2S content≤ 200mg/Nm³

NH3 content≤ 20mg/Nm³

Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M

Water content≤ 40g/Nm³ , no free water.


Acceptable working conditions:

Ambient temperature: -10° C~+40° C

(antifreeze or preheater needed for below 0° C)

Relative humidity: <90%(20° C)

Altitude: ≤ 1000m

Normal working conditions:

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.

Standard scope of supply:
1, Gas Engine

2, AC Generator

3, Common Frame

4, Control Panel

5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug

6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor

7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic

8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body

9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor

10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve

11, Exhaust Bellows & Muffler

12, Radiator for optional

Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
Googol Series  Biogas Generator, 1500rpm, 50Hz, CH4 :60%,CO2:40%                      
Genset Model   HGGM200 HGGM250 HGGM313 HGGM400 HGGM500 HGGM750 HGGM900 HGGM1285 HGGM1600 HGGM1815
Engine Model   RTA780G1 RTA780G3 RTA890G1 RTA1120G1 RTA1340G1 JTA2160G1 JTA2160G3 JTA3240G3 JTA4320G1 JTA4320G3
Rating Speed  rpm 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Frequency  Hz 50 50 50 50 50 50 50 50 50 50
Generator Output (COP) kW 160  200  250  320  400  600  720  1024  1280  1452 
Power Factor   0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Gas Engine Parameter                      
Engine Output  (COP) kW 180  222  278  355  438  629  751  1069  1328  1503 
Air Ratio λ 1.65  1.7  1.7  1.7  1.7  1.67  1.7  1.7  1.65  1.7 
Configuration   6 In line 6 In line 8 Vee 10 Vee 12 Vee 8 Vee 8 Vee 12 Vee 16 Vee 16 Vee
Displacement  l 12.8 12.8 14.6 18.3 21.9 35.4 35.4 53.1 70.8 70.8
Bore  mm 128 128 128 128 128 170 170 170 170 170
Stroke  mm 166 166 142 142 142 195 195 195 195 195
Compression Ratio   11:1 11:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1
Piston Speed  m/s 8.3 8.3 7.1 7.1 7.1 9.75 9.75 9.75 9.75 9.75
Number of Flywheel Teeth    160  160  160  160  160  218  218  218  218  218 
Flywheel House Size   SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE00-18 SAE00-18 SAE00-21 SAE00-21 SAE00-21
System Parameter                      
Oil Capacity  l 40 40 70 80 90 160 160 180 240 240
Max. Allowed Oil Temperature  °C 110 110 110 110 110 110 110 110 110 110
Oil Pressure Warning  kPa 200  200  200  200  200  300  300  300  300  300 
Oil Pressure Shutdown  kPa 160  160  160  160  160  200  200  200  200  200 
Coolant Capacity for Engine  l 18 18 36 42 44 70 70 100 140 140
Max. Coolant Warning Temperature   °C 90 90 90 90 90 95 95 95 95 95
Max. Coolant Shutdown Temperature   °C 95 95 95 95 95 100 100 100 100 100
Max. Intercooler Outlet Temperature   °C 50 50 50 50 50 40.5 40.5 40.5 40.5 40.5
Flow of Coolant pump (JW) m³/h 20 20 26 26 26 48 48 48 80 80
Flow of Coolant pump (LT) m³/h 14 14 14 14 14 45 45 45 75 75
Max. Exhaust Temperature °C 505 505 505 505 505 485 485 485 485 485
Exhaust Flow kg/h 776 776 943 1232 1520 3264 3896 5523 6891 7887
Exhaust Flange Diameter  mm 1*125 1*125 2*125 2*125 2*125 1*250 1*250 1*250 1*250 1*250
Charging Alternator Capacity  A 35 35 35 35 35 55 55 55 55 55
Starting Voltage  V 24 24 24 24 24 24 24 24 24 24
Thermal Balance                      
JW Coolant Heat  ± 8% kW 101 125 145 185 223 320 375 535 680 770
CAC Intercooler Heat ± 8% kW           50 60 85 107 121
Exhaust Heat up to 120°C ± 8% kW 118 145 164 211 268 368 434 574 711 805
Energy Input  kW 465  575  683  865  1072  1538  1823  2522  3184  3585 
ELectrical Efficiency  % 34.4 34.8 36.6  37.0  37.3  39.0  39.5  40.6  40.2  40.5 
Mechanical Efficiency  % 37.0  37.2  39.1  39.5  39.6  40.9  41.2  42.2  41.7  41.9 
Thermal Efficiency % 47.1  47.0  45.2  45.8  45.8  44.7  44.4  44.0  43.7  43.9 
Total Efficiency % 81.5  81.8  81.8  82.8  83.1  83.7  83.9  84.6  83.9  84.4 
Gas Consumption MJ/kWh 10.47  10.34  9.84  9.73  9.65  9.23  9.11  8.87  8.75  8.89 
Generator Parameter-MECC ALTE                      
Generator Model   ECO38-3SN/4 ECO38-2LN/4 ECO38-3LN/4 ECO40-2S/4 ECO40-1L/4 ECO43-2SN/4 ECO43-1LN/4 ECO43-VL/4 ECO46-2S/4 ECO46-1L/4
Generator Prime Output kW 180 240 280 360 440 680 880 1120 1440 1680
Generator Efficiency @ 0.8PF   93.0% 93.5% 93.6% 93.7% 94.2% 95.4% 95.9% 96.2% 96.4% 96.6%
Genset Dimension                      
Length  mm 3100 3100 3300 3500 3600 4600 4600 4500 5000 5000
Width  mm 1300 1300 1500 1500 1500 2190 2190 1600 1600 1600
Height  mm 1700 1700 2000 2000 2000 2300 2300 2200 2300 2300
Genset Weight kg 2500 2500 3500 3900 4300 7350 7650 10500 13500 13500


50Hz 1500rpm Googol Biogas Engine for Generator 160kw-1450kw 50Hz 1500RPM Googol Biogas Engine For Generator 160kW-1450kW


Note:
1. All engine parameters are in accordance with ISO3046, ISO8528.
2. All engine parameters are based on 25° C / 100kPa environment condition.
3. Application for Power Generation, Marine, Pump Driving, CHP power plant.


Applied gas:

Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas, etc

Acceptable fuel gas pressure: 5~12kPa

CH4 content: For natural gas≥ 85% CH4, content: For biogas≥ 40%

Gas heat value≥ 5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency.

Gas doesn't include free water or free materials (the size of impurities should be less than 5μ M. )

H2S content≤ 200mg/Nm³

NH3 content≤ 20mg/Nm³

Impurities content≤ 30mg/Nm³ ; Size≤ 5μ M

Water content≤ 40g/Nm³ , no free water.


Acceptable working conditions:

Ambient temperature: -10° C~+40° C

(antifreeze or preheater needed for below 0° C)

Relative humidity: <90%(20° C)

Altitude: ≤ 1000m

Normal working conditions:

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20° C, Relative Humidity: 30%.

Standard scope of supply:
1, Gas Engine

2, AC Generator

3, Common Frame

4, Control Panel

5, Ignition System: Ignition Controller, Ignition Coils, Output harness, Pickup magnetic, Trigger disc, PolyMot high tension lead, Spark Plug

6, Detonation Controller System: DetCon20 control unit, Detonation sensor, Cable & knock sensor

7, Electronic Speed Controller System: Integrated Throttle body, Vari-Step stepper motor card, Harness VariFuel, Electronic speed controller - ECON-4, pickup magnetic

8, Gas Mixer System: VariFuel air/fuel ratio mixer, VF Flange, VariStep stepper motor card, Harness VariFuel, VariFuel2 flow body

9. Emission Control System: EmCon5 control unit, EmCon5 sensor harness, knock sensor

10, Valve: Gas Pressure Valve, Solenoid Valve, Cutoff Valve

11, Exhaust Bellows & Muffler

12, Radiator for optional

Warranty:
All equipment is guaranteed for a period of 1000 hours running or 18 months from the date when the generator set has been delivered from the factory.
Googol Series  Biogas Generator, 1500rpm, 50Hz, CH4 :60%,CO2:40%                      
Genset Model   HGGM200 HGGM250 HGGM313 HGGM400 HGGM500 HGGM750 HGGM900 HGGM1285 HGGM1600 HGGM1815
Engine Model   RTA780G1 RTA780G3 RTA890G1 RTA1120G1 RTA1340G1 JTA2160G1 JTA2160G3 JTA3240G3 JTA4320G1 JTA4320G3
Rating Speed  rpm 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Frequency  Hz 50 50 50 50 50 50 50 50 50 50
Generator Output (COP) kW 160  200  250  320  400  600  720  1024  1280  1452 
Power Factor   0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Gas Engine Parameter                      
Engine Output  (COP) kW 180  222  278  355  438  629  751  1069  1328  1503 
Air Ratio λ 1.65  1.7  1.7  1.7  1.7  1.67  1.7  1.7  1.65  1.7 
Configuration   6 In line 6 In line 8 Vee 10 Vee 12 Vee 8 Vee 8 Vee 12 Vee 16 Vee 16 Vee
Displacement  l 12.8 12.8 14.6 18.3 21.9 35.4 35.4 53.1 70.8 70.8
Bore  mm 128 128 128 128 128 170 170 170 170 170
Stroke  mm 166 166 142 142 142 195 195 195 195 195
Compression Ratio   11:1 11:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1 12:1
Piston Speed  m/s 8.3 8.3 7.1 7.1 7.1 9.75 9.75 9.75 9.75 9.75
Number of Flywheel Teeth    160  160  160  160  160  218  218  218  218  218 
Flywheel House Size   SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE1-14 SAE00-18 SAE00-18 SAE00-21 SAE00-21 SAE00-21
System Parameter                      
Oil Capacity  l 40 40 70 80 90 160 160 180 240 240
Max. Allowed Oil Temperature  °C 110 110 110 110 110 110 110 110 110 110
Oil Pressure Warning  kPa 200  200  200  200  200  300  300  300  300  300 
Oil Pressure Shutdown  kPa 160  160  160  160  160  200  200  200  200  200 
Coolant Capacity for Engine  l 18 18 36 42 44 70 70 100 140 140
Max. Coolant Warning Temperature   °C 90 90 90 90 90 95 95 95 95 95
Max. Coolant Shutdown Temperature   °C 95 95 95 95 95 100 100 100 100 100
Max. Intercooler Outlet Temperature   °C 50 50 50 50 50 40.5 40.5 40.5 40.5 40.5
Flow of Coolant pump (JW) m³/h 20 20 26 26 26 48 48 48 80 80
Flow of Coolant pump (LT) m³/h 14 14 14 14 14 45 45 45 75 75
Max. Exhaust Temperature °C 505 505 505 505 505 485 485 485 485 485
Exhaust Flow kg/h 776 776 943 1232 1520 3264 3896 5523 6891 7887
Exhaust Flange Diameter  mm 1*125 1*125 2*125 2*125 2*125 1*250 1*250 1*250 1*250 1*250
Charging Alternator Capacity  A 35 35 35 35 35 55 55 55 55 55
Starting Voltage  V 24 24 24 24 24 24 24 24 24 24
Thermal Balance                      
JW Coolant Heat  ± 8% kW 101 125 145 185 223 320 375 535 680 770
CAC Intercooler Heat ± 8% kW           50 60 85 107 121
Exhaust Heat up to 120°C ± 8% kW 118 145 164 211 268 368 434 574 711 805
Energy Input  kW 465  575  683  865  1072  1538  1823  2522  3184  3585 
ELectrical Efficiency  % 34.4 34.8 36.6  37.0  37.3  39.0  39.5  40.6  40.2  40.5 
Mechanical Efficiency  % 37.0  37.2  39.1  39.5  39.6  40.9  41.2  42.2  41.7  41.9 
Thermal Efficiency % 47.1  47.0  45.2  45.8  45.8  44.7  44.4  44.0  43.7  43.9 
Total Efficiency % 81.5  81.8  81.8  82.8  83.1  83.7  83.9  84.6  83.9  84.4 
Gas Consumption MJ/kWh 10.47  10.34  9.84  9.73  9.65  9.23  9.11  8.87  8.75  8.89 
Generator Parameter-MECC ALTE                      
Generator Model   ECO38-3SN/4 ECO38-2LN/4 ECO38-3LN/4 ECO40-2S/4 ECO40-1L/4 ECO43-2SN/4 ECO43-1LN/4 ECO43-VL/4 ECO46-2S/4 ECO46-1L/4
Generator Prime Output kW 180 240 280 360 440 680 880 1120 1440 1680
Generator Efficiency @ 0.8PF   93.0% 93.5% 93.6% 93.7% 94.2% 95.4% 95.9% 96.2% 96.4% 96.6%
Genset Dimension                      
Length  mm 3100 3100 3300 3500 3600 4600 4600 4500 5000 5000
Width  mm 1300 1300 1500 1500 1500 2190 2190 1600 1600 1600
Height  mm 1700 1700 2000 2000 2000 2300 2300 2200 2300 2300
Genset Weight kg 2500 2500 3500 3900 4300 7350 7650 10500 13500 13500


50Hz 1500rpm Googol Biogas Engine for Generator 160kw-1450kw

Sign Cnc Router


Sign Making Cnc Router, great option for sign, graphic, printing, displaying, advertising industry. Precision cutting aluminum, copper alloy trim, IT trim, acrylic, etc.


Acrylic Cutting Cnc Router's applicable scope:


  • Advertising industry: acrylic mini-word high-light cutting, MDF cutting, color plate engraving, all kinds of advertising plate, logo production.
  • Furniture industry: cabinet doors, wooden doors, solid wood, mahogany furniture, antique furniture all kinds of composite sheet cutting and engraving.
  • Panel processing industry: insulation, plastic chemical parts, PCB, anti-times special board, epoxy resin, ABS, PP, PE and other carbon compounds.
  • Crafts industry: can be mainly used for the artificial stone, PVC, wood, bamboo, marble, plexiglass, copper and aluminum, etc.
  • Decorative industry: screen, wave board, bamboo, marble, organic board, color plates and other materials on a variety of beautiful patterns and text carving.

Sign cnc router 1325

Mini acrylic word cnc cutting machine


Cnc Router for cutting mini acrylic word's Characteristics:


1. The bed is made of thick-walled steel pipe, which is treated by high temperature tempering to ensure machine body with high strength, and no deformation.
2. With breakpoint, continuation on break point function, with homing automatic error correction function, effectively guarantee the work of a long time in the processing accuracy.
3. Unique storage design, easy to store tools, tools.
4. Using high rack gear transmission to ensure machine with high precision, fast speed, maximum speed can up to 90m / min.
5. Featured circuit accessories, a variety of protection is complete, to ensure the safe operation of spare parts and machines to reduce the failure rate.
6. Equipment control system is simple, with user-friendly design, in line with human structure, to facilitate customer operation.
7.T-slot+Vacuum table, can be easily used for all kinds of materials.
8. Machine software`s compatibility is good, compatible with tyoe3 / Artcam / Castmate / Wentai and other CAD / CAM design software.
9. Precision tool auto-checking instrumen, save time and effort, a key to start, save resources.

10. High safety performance factor, a key operation and the host and line operation, while starting and stopping the limit, the wrong version of the alarm buzzer to improve the safety factor.

mini letter cutting machine's parts

acrylic cutting machine


Technical parameters:


  • Model AS-1325/1530/2030, optional
  • Controller: Multech P20
  • XYZ working size: 1300*2500*200mm
  • Running mode: Delta servo motor/Taiwan reducer
  • XYZ structure: XY1.5 helical tooth gear transmission+Z TBI ball screw+Taiwan HIWIN rail guide
  • Max traveling speed 90m/min
  • Cutter diameter: ï¿ 3.14.ï¿ 6.ï¿ 12.7ï¿ 12
  • Rail Guide brand: Taiwan HIWIN 25rail guide+25 Flange slider
  • Spindle power: Φ125mm-5.5KWwater cooling spindle
  • Working voltage(Optional): 380V 50hz
  • Inverter: 7.5KW 380V Sunfar inverter
  • Driver:  Delta servo driver
  • Switching power supply: MW power supply
  • Servo motor: Delta servo
  • Spindle revolving speed: 0-24000r/min
  • Table T-slot+Vacuum table
  • Compatible software: Windows2000/windows XP/windows7
  • Command code: Hpgl.G code.Uoo.Mmg.Plt

Sign Cnc Router

Sign Cnc Router,Sign Making Cnc Router,Cnc Router Sign Making Machine,Acrylic Sign Cnc Cutter

Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de