MACHINEÂ Â PARTS | QUANTITY |
MAIN EXTRUDER | 1 OR 2Â SETS |
EXTRUDING DIE AND CALIBRATION MOULD | 1 SET |
VACUUM CALIBRATION TABLE | 1 SET |
SYNCHRONIZED DUAL BELTS PULLING MACHINE | 1 SET |
FIXED LENGTH PRECISE CUTTER AND STORAGE MACHINE | 1 SET |
SINGLE SCREW EXTRUDER OR TWO EXTRUDERS CO-EXTRUSION |
(1) Screw model: AF-45, AF-50, AF-55, AF-65 available for option; L/D: 28:1; Separated type screw is adopted as it is especially suitable for PC transparent material, milky material and diffusion material for production, so as to lower down raw materials cost largely. (2) AC motor drive, with enough motive power and quite stable in running; Temperature control meter: intelligent type; the precision could reach +/-1 degree; (3) Heating control zone: 7 zone (barrel 4 zone, extruding die 3 zone); According to different extruders.  |
EXTRUDING DIE AND CALIBRATION MOULD |
Special S136H mirror surface steel for dies, the surface of the extruding dies is mirror polished. Â |
VACUUM CALIBRATION TABLE |
(1) Stainless steel tank; 3D adjusting machine frame, with 12-way vacuum, 12 way cooling water; Â (2) circular water cooling tank Provide water to calibration mould Water pump: 0.37KW (3) vacuum pump fixed outside; the whole machine is compact and strong without vibration. (4) Length: 1.5m, 2m, 2.5m, 3m for option; (5) Vacuum pressure: 0.01~0.08MPA, adjustable; Vacuum pump power: 2.2KW or 3KW; Vacuum is stable and silent. Â |
SYNCHRONIZED DUAL BELTS PULLING MACHINE |
(1) Open-close, up-down adjusting; belt workable length 1Â meter, constant stable puller; (2) high wear-resistant foamed surface PU multi-wedge belt; (3) high precision frequency conversion controller; tractor speed 0-15m/minute stepless adjustable. (4) Single motor or double motor available for option; Power: 1.5KW or 2.2KW Â |
FIXED LENGTH PRECISE CUTTER AND STORAGE MACHINE |
(1) Innovative cutting technology; Optical type length-setting device; Solve the online-precise-cutting difficulty in this industry; (2) Online cutting precision: within 0.5mm; (3) No burrs cutting, without powder and dust; No need the second time precise cutting;Â (4) SIEMENS PLC control with display screen Easy to set value and operate. Â |
PACKAGING | plastic film +Â stretch film +Â wooden case +Â drying agent. |
DELIVERY | About 50 days (all new parts) |
SHIPPING |
We place and fix the machines well into container and check carefully before closing the container so as to ensure everything is ok for the shipment. (Use steel wire to fix machine and drying agent). We care each and every point so that our clients could receive the machines in perfect situation. |
PRE-SALE |
a. Detailed machine introduction; b. Suggest suitable turnkey solution as per clients requirements;Â c. Provide test production for reference;Â Â |
IN PRODUCTION |
a. Supply layout drawing to clients for preparation; b. Suggest suitable building project for pipelines, electric wiring, air pipes, cooling cycle water etc; c. Keep the clients be informed of the production status; |
AFTER SALE |
a. Send engineers to overseas for installation ,commissioning and training; b. Supply extruding products' material formula, recommend excellent supplier of the raw material per clients' requests;Â c. Offer help if any need from clients like spare parts need etc;Â d. Supply necessary technical support at request; |
MACHINEÂ Â PARTS | QUANTITY |
MAIN EXTRUDER | 1 OR 2Â SETS |
EXTRUDING DIE AND CALIBRATION MOULD | 1 SET |
VACUUM CALIBRATION TABLE | 1 SET |
SYNCHRONIZED DUAL BELTS PULLING MACHINE | 1 SET |
FIXED LENGTH PRECISE CUTTER AND STORAGE MACHINE | 1 SET |
SINGLE SCREW EXTRUDER OR TWO EXTRUDERS CO-EXTRUSION |
(1) Screw model: AF-45, AF-50, AF-55, AF-65 available for option; L/D: 28:1; Separated type screw is adopted as it is especially suitable for PC transparent material, milky material and diffusion material for production, so as to lower down raw materials cost largely. (2) AC motor drive, with enough motive power and quite stable in running; Temperature control meter: intelligent type; the precision could reach +/-1 degree; (3) Heating control zone: 7 zone (barrel 4 zone, extruding die 3 zone); According to different extruders.  |
EXTRUDING DIE AND CALIBRATION MOULD |
Special S136H mirror surface steel for dies, the surface of the extruding dies is mirror polished. Â |
VACUUM CALIBRATION TABLE |
(1) Stainless steel tank; 3D adjusting machine frame, with 12-way vacuum, 12 way cooling water; Â (2) circular water cooling tank Provide water to calibration mould Water pump: 0.37KW (3) vacuum pump fixed outside; the whole machine is compact and strong without vibration. (4) Length: 1.5m, 2m, 2.5m, 3m for option; (5) Vacuum pressure: 0.01~0.08MPA, adjustable; Vacuum pump power: 2.2KW or 3KW; Vacuum is stable and silent. Â |
SYNCHRONIZED DUAL BELTS PULLING MACHINE |
(1) Open-close, up-down adjusting; belt workable length 1Â meter, constant stable puller; (2) high wear-resistant foamed surface PU multi-wedge belt; (3) high precision frequency conversion controller; tractor speed 0-15m/minute stepless adjustable. (4) Single motor or double motor available for option; Power: 1.5KW or 2.2KW Â |
FIXED LENGTH PRECISE CUTTER AND STORAGE MACHINE |
(1) Innovative cutting technology; Optical type length-setting device; Solve the online-precise-cutting difficulty in this industry; (2) Online cutting precision: within 0.5mm; (3) No burrs cutting, without powder and dust; No need the second time precise cutting;Â (4) SIEMENS PLC control with display screen Easy to set value and operate. Â |
PACKAGING | plastic film +Â stretch film +Â wooden case +Â drying agent. |
DELIVERY | About 50 days (all new parts) |
SHIPPING |
We place and fix the machines well into container and check carefully before closing the container so as to ensure everything is ok for the shipment. (Use steel wire to fix machine and drying agent). We care each and every point so that our clients could receive the machines in perfect situation. |
PRE-SALE |
a. Detailed machine introduction; b. Suggest suitable turnkey solution as per clients requirements;Â c. Provide test production for reference;Â Â |
IN PRODUCTION |
a. Supply layout drawing to clients for preparation; b. Suggest suitable building project for pipelines, electric wiring, air pipes, cooling cycle water etc; c. Keep the clients be informed of the production status; |
AFTER SALE |
a. Send engineers to overseas for installation ,commissioning and training; b. Supply extruding products' material formula, recommend excellent supplier of the raw material per clients' requests;Â c. Offer help if any need from clients like spare parts need etc;Â d. Supply necessary technical support at request; |
Glass Cutting Machine mainly used to cut glass, mainly include aumomatic and semi-automatic flat glass
cutting machine, Laminated Glass Cutting Machine, super thin galss machine etc. It includes manual,
semi-aumatic and cnc glass cutting table.
Model No.XTS-3826 type high precision double cutting semi auto laminating glass cutting machine is
widely used in thick plate glass, laminated glass from the line.
The equipment operation is convenient, reliable, stable operation, the cutting efficiency and high precision.
Glass Cutting Machine
Glass Cutting Machine,CNC Glass Cutting Machine,Laminated Glass Cutting Machine,Automatic Glass Cutting Machine
Jinan XingTian Sunshine CNC Machine Co.,Ltd , https://www.cncplate.de