Metal Detector Machine for Seperating Brass/Copper, Iron

Metal Separator
BH series metal separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminium, lead, tin, and so on. Its principle is when metal impurities pass through it, electrical detector can send a signal to control board to start valve to discharge the impurity materials. Pneumatic discharging system takes little space and ensures good performance. It can be installed directly on injection molding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals, reducing damages to molds, hot nozzles and valves.

Technical Parameters

Advantage                                                                                                                                                          
1. Adopts German technology, long life, super-high value with competitive price
2. Used to detect separated magnetic and non-magnetic metal impurities from free-fall bulk materials
3. Special design, can effectively avoid the vibration, noise and other external factors
4. Avoid moldy caused by products accumulation and obstruction
5. A variety of calibers are optional, models can meet all practical applications
6. By removing the system for quick culling, material loss can be reduced without disturbing the normal production process
7. Test material characteristics: Bulk (pellets, powder, etc.), dry, good fluidity
8. Elimination method: Vane automatically remove metal impurities, with sound and light alarm at the same time
9. Sensitivity: The highest precision is up to Fe ¢ 0.20mm, stainless steel SUS ¢ 0.5MM
10. Stand, hopper can be customized according to customer requirements

Metal Separator
BH series metal separators are highly sensitive and accurate in detecting and separating metal grains, such as steel, iron, copper, aluminium, lead, tin, and so on. Its principle is when metal impurities pass through it, electrical detector can send a signal to control board to start valve to discharge the impurity materials. Pneumatic discharging system takes little space and ensures good performance. It can be installed directly on injection molding machine or (extruders) hoppers to protect the screw of machine from the damage caused by hard metals, reducing damages to molds, hot nozzles and valves.

Technical Parameters

Advantage                                                                                                                                                          
1. Adopts German technology, long life, super-high value with competitive price
2. Used to detect separated magnetic and non-magnetic metal impurities from free-fall bulk materials
3. Special design, can effectively avoid the vibration, noise and other external factors
4. Avoid moldy caused by products accumulation and obstruction
5. A variety of calibers are optional, models can meet all practical applications
6. By removing the system for quick culling, material loss can be reduced without disturbing the normal production process
7. Test material characteristics: Bulk (pellets, powder, etc.), dry, good fluidity
8. Elimination method: Vane automatically remove metal impurities, with sound and light alarm at the same time
9. Sensitivity: The highest precision is up to Fe ¢ 0.20mm, stainless steel SUS ¢ 0.5MM
10. Stand, hopper can be customized according to customer requirements

Sink Hydraulic Press

Sink Hydraulic Press,Servo Pressure Regulator,Hydraulic Pressure Gauge,Servo Press Machine

Chongqing Jiangdong Machinery Co., Ltd , https://www.cqjdpress.com