One to two wrecker operation method @ çè— ç‰ˆ
A lot of users who came to our factory to buy one-for-two wreckers have not been in the industry before. Although they have B2 or even A2 driver's licenses, they can't master the operation process in a short time when they operate such special vehicles. The explanation seems to be clear, but when the new car is brought back and operated independently on its own, it is not possible to know how to do it or it will not, and repeatedly calling and sending videos for help. Today, I will share the operation method of this collector's edition to every friend in need, I hope it will be helpful to everyone!
One to two wrecker operation method @ çè— ç‰ˆ ：
1. First disengage the winch clutch, pull out the steel cable to the vehicle to be carried, and hook the "j" hook to the traction shackle at the bottom of the towed end of the vehicle. Then engage the winch's clutch. Note that the number of turns of the cable left when pulling out the cable should not be less than 5 turns.
2. The carried vehicle must be in neutral, and the parking brake of the carried vehicle should be released.
3. Control the winch joystick, pull the car onto the platform, and control the distance of the j-hook on the steel cable from the winch to more than 0.4m. When the winch is under load, do not disengage the manual control clutch of the winch. This will damage the winch. Note: When using a chain hook to draw an accident car with a winch, for a car with a lower chassis, be very careful not to damage the part being towed to avoid unnecessary trouble.
4. After the loaded vehicle has been dragged into place, tie the rear tire with safety straps, and tighten the loaded car diagonally to the two sides of the flat pull ring on the sides. Note: If the safety tab is broken, the safety strap should be wrapped around the solid part of the car. If the safety bandage cannot be locked manually, the winch can be controlled to control the winch to move the loading truck forward a little, so that the safety chain is properly tensioned.
5. Flat wrecker, when fixing the faulty car with straps on the flat, four straps must be locked on the wheels or the body.
6. The strap ratchet must be closed when locked.
Note: Nylon bandages will become loose for a long period of tension. Check the bandage tension regularly during operation, especially in the case of poor road conditions or heavy braking, and check the tightening in time to avoid accidents.
7. Control the platform to tilt the joystick to raise the tail of the platform from the ground by 0.15m.
8. Control the platform tilt lever to move the platform forward to about 0.6m from the front end, and control the platform tilt lever to return the platform to a horizontal position.
9. Control the platform slide joystick to move the platform forward to the front.
10. In order to prevent possible damage to the winch due to vibration and tension of the steel cable during the following driving process, the front end of the car must be fixed with two other safety chains and tensioned as much as possible. Load positioning and tightening.
11. Put the loaded car in first gear and apply the handbrake.
12. Check whether all safety chains or chains and connections are secure and tight.
13. After the above steps are completed, follow-up work procedures are carried out. Step on the clutch of the road wrecker, disengage the power take-off, and the platform loading operation is completed.
One Tow Two Clearance Trailer National Sales Hotline (Same number on WeChat)
Expanded metal - Light and Small Meshes
Light and small meshes are used in applications such as air filtration, ceiling panels, and machine guards. Small mesh is typically 3/16" to ½" SWD pattern. Available materials include cold rolled steel, galvanized steel, stainless, aluminum, and copper.
Expanded metal - INTERMEDIATE MESH
Intermediate patterns are used for applications such as lockers, chimney caps, vents, patio furniture and grilles. Typical patterns include ½" to ¾" SWD. Available materials include cold rolled steel, galvanized steel, stainless, aluminum, and copper..
EXPANDED METAL - LARGE, HEAVY & GRATING MESHES
Large and heavy patterns are used in applications such as park and recreation, security fencing, machine guards, shelving, cat walks, and automotive racks. Typical patterns include ¾" to 1 ½" and larger. Available materials include cold rolled steel, galvanized steel, stainless, aluminum, and copper.
The LEVELMASTER: Our flattening and leveling line produces the finest stainless, carbon, and aluminum expanded metal in the industry. Flattened grating produced on the LevelMaster is a Metalex exclusive!
EXPANDED METAL - Micro Mesh
Expanded metals are being put to new uses in highly technical products. We are developing smaller and more perfect patterns to meet the demands of industry for tighter and more precise specifications for diamond pattern, thickness, hole size and workability.
Micromesh provides superior heat transfer characteristics. It can be made acoustically neutral for applications such as dent guards in audio speakers. It can be flattened to reduce thickness and provide a smoother surface; made non-nesting to allow wrapping on itself without losing air flow capability; annealed for improved formability; and coated with either metallic or organic compounds.
Micromesh is manufactured from carbon steel, stainless steel, copper and aluminum.
Expanded metal - Barrier Mesh / security mesh
Barrier mesh protects against break-ins and break-outs. It safeguards walls and ceilings in homes, apartments, offices, stores, storage areas and correctional facilities.
EXPANDED METAL - Security Fencing
From border fencing to rail yards and logistics depots, expanded metal is the product of choice for today`s more robust security requirements. It is impossible to scale, can not be easily cut, and has superior impact and tensile strength. See large and heavy mesh tables for options and available gauges.
Standard Expanded Metal,Expanded Metal Mesh,Standard Expanded Metal Mesh,Expanded Metal for Laminated Nonwoven Fabric
Hebei Fangyu Trade Co., Ltd. , https://www.laderytrading.com