Mineral Processing Equipment
Â
Main specification of ultrafine grinding mill type mineral processing equipment:
Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680L |
Ring Diameter(mm) | 800 | 900 | 1000 | 1250 | 1680 |
Ring Number (PCS) | 3 | 3-4 | 4 | 4 | 4 |
Roller Number(PCS) | 18-21 | 24-29 | 28-36 | 30-44 | 30-40 |
Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 135-155 | 120-130 |
Input Size (mm) | ≤10 | ≤10 | ≤15 | ≤15 | ≤20 |
Finished Size (um/mesh) |
74-5 (200-2500) |
74-5 (200-2500) |
74-5 (200-2500) |
100-6 (150-2000) |
100-9 (150-1500) |
Capacity (t/h) | 0.4-4.5 | 0.6-6.5 | 1-9 | 2-16 | 3.8-30 |
Outlet Size L*W*H (m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |
Â
Unit: KW | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680L |
Main Unit | 55-75 | 2*45 | 132 | 185-200 | 315 |
Classifier | 18.5 | 18.5 | 30 | 37-4*15 | 5*18.5 |
Blower | 45 | 55 | 75 | 2*45-2*55 | 2*75-2*90 |
Crusher | 18.5 | 18.5 | 18.5 | 45 | 75 |
Bucket Elevator | 3 | 3 | 4 | 4 | 7.5 |
BeltConveyor Feeder | 2.2 | 2.2 | 2.2 | 3 | 3 |
Spiral Conveyor | 3 | 3 | 3-4 | 2*3 | 2*5.5 |
Discharging Valve | 2*0.75 | 1*0.75Â 1*1.1 | 2*1.1 | 2*1.1 | 2*0.75-2*1.5 |
Air compressor | 11 | 15 | 22 | 2*15-37 | 55 |
Remark: For the data with prefix such as "2*xx",it means there are two motors 2*0.75,configuredfor one item Forexample,discharging valve,HGM80 with configuration it means there are 2 pieces of 0.75KW motors installed with discharging valve. |
Â
Note: This specification is just referencing, any changes are subject to the products.
Â
Main specification of Raymond mill type mineral processing equipment:
Â
Model |
Roller |
Ring |
          Feeding Size(mm) |
           Finished Size(mm) |
Powder |
capacity |
Dimension |
|||
quantity |
Diameter |
Height |
Inner Diameter(mm) |
Height |
||||||
YGM7815 |
3 |
260 |
150 |
780 |
150 |
15 |
0.613-0.033 |
18.5 |
1--3 |
4300*3500*5100 |
YGM8314 |
3 |
270 |
140 |
830 |
140 |
20 |
0.613-0.033 |
22 |
1.2--4.6 |
5300*4100*5200 |
YGM9517 |
4 |
310 |
170 |
950 |
170 |
25 |
0.613-0.033 |
37 |
2.1-5.6 |
7100*5900*7900 |
YGM4121 |
5 |
410 |
210 |
1280 |
210 |
30 |
0.613-0.033 |
75 |
2.8-10.5 |
9200*7250*9700 |
MTM160 |
6 |
440 |
270 |
160 |
270 |
35 |
0.613-0.033 |
132 |
5--20 |
12550*5700*8350 |
Â
Note: Any changes of technical data shall not be prior advised.
Â
Specification of coarse powder grinding mill type mineral processing equipment:
Â
Type |
PCC4008-75 |
PCC40012-90 |
PCC40015-132 |
Rotor Diameter/mm |
750 |
900 |
1150 |
Rotor Width/mm |
800 |
1200 |
1500 |
Rotor Speed r/min |
800-1000 |
800-1000 |
550-800 |
Feed head size/mm |
320*930 |
400*1200 |
500*1500 |
Feeding Size/mm |
≤50 |
≤60 |
≤80 |
Finished Size/mm |
≤3 |
≤3 |
≤8 |
Capacity t/h |
10--30 |
30--60 |
50--100 |
Powder/kw |
55-75 |
75-90 |
110-132 |
Hammer Number (piece) |
18 |
32 |
32 |
Overall Size L*W*H/mm |
2310*1665*1610 |
2840*2100*2020 |
3720*2650*2540 |
Â
Note: Any changes of technical data shall not be prior advised.
Â
Â
Application of mineral processing equipment:
Â
Mineral processing equipment is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Â
Â
Company brief introductionWrought Iron Gate,Folding Door Gates,Metal Iron Fancy Gates,Modern Steel Gates
Tai'an Zhuoyue Laser Ltd. , http://www.zhuoyuelaserfab.com