1, no matter what kind of bar is for ease of operation and visual beauty, it must be composed of three parts, namely bar height, before and after bar.
2. The height of the bar is approximately 1-1.2 meters, but this height standard is not an absolute truth and should be determined by the average height of the bartender.
3, the front of the operating table below, the height is generally 76 cm, but it is not static, it should be determined according to the bartender height.
4, after the height of it is usually more than 1.75 meters, but the top can not be higher than the bartenders reach, the lower layer is generally about 1.10 meters, or the height of the bar (front).
5. The distance from the front bar to the rear bar, that is, the service staff's work aisle, is generally about 1 meter, and there must be no other equipment to stand out from the aisle. The top should be equipped with a blister board or a rubber board roof to ensure the safety of the bar staff. The floor of the walkway is paved with plastic or wood strips or rubber pads to reduce the fatigue caused by service personnel standing for a long time.
Second-hand Air-jet Loom
The air-jet loom is a new type of loom that uses the high-speed airflow generated by the released compressed air to draw the weft through the loom to complete the weft insertion. It is currently the fastest growing machine type in the Shuttleless Loom. We have China's leading second-hand air-jet looms, automatic weaving air-jet looms, glass fiber looms and other second-hand looms.
Second-Hand Air-Jet Loom,Second-Hand Weaving Machine,Automatic Weaving Air-Jet Loom,Glass Fiber Loom
Tianchi Changzhou Textile Machinery Co., Ltd , https://www.tcloom.com