The highest price increase after the US Taxi’s "double tax" is 300,000 yuan

On December 14, the Ministry of Commerce announced that it will impose anti-dumping and countervailing duties on some large-displacement imported cars from the United States in the next two years, involving companies such as General Motors, Chrysler and Mercedes-Benz, BMW, Honda, and other companies. The period is from two years from December 15, 2011 to December 14, 2013.

What is the impact of "double taxation" in the end? Yesterday, the reporter conducted an in-depth investigation of the Chengdu market. Huang Xun, general manager of Sichuan New Cadillac Cadillac, said in an interview: “The biggest impact of this “double tax” is on Cadillac, and the maximum cost will increase by more than 300,000 yuan. Up till now, the factory has not received the price adjustment notice, and its effect will appear after the Spring Festival."

American cars

Cadillac and Chrysler are the most injured

Zhao Hong, chairman of Chengdu City Vehicles, told the newspaper that the “double taxation” imposed on a large scale has a greater impact on US-related products in China. This is also the first time China has entered the WTO and has conducted a “double counter” investigation on imported vehicles. At present, China's tariff on the import of whole vehicles is 25%. This time, it imposes additional taxes on imported cars from the United States, and the surcharge rate is not low. In this case, the competitiveness of the American cars will be greatly reduced, and similar models from Europe and Japan will benefit.

"From the point of view of the currently affected vehicles, the Cadillac and Chrysler models of the US Department of Imported Vehicles are affected more." Zhao Hong calculated an account for the reporter and the company's brand model Chrysler Jeep also "double anti-" "Expropriation, calculated on the basis of a top 800,000 Jeep, will increase its price and cost by more than 60,000 yuan. "The impact is not too great."

"But for Cadillac, the situation is not good." Huang Xun's voice on the phone is obviously not so easy: "Double Taxes" is "significant" for Cadillac, with a total tax rate of 21.8%, in other words , A 150 million Carlyle, its cost will increase by more than 30 million. However, they have not yet received any notification from the manufacturer. The price of the vehicle has not been adjusted for a while. Waiting until the import of the imported vehicles under the Customs declaration after the “double anti-taxes” is levied will have its impact after the Spring Festival. "So, now is the best time to purchase Cadillac."

Non-American cars

BMW, Mercedes and Acura are implicated

Although the "double taxation" is aimed at importing cars from the United States, the two German luxury car brands BMW and Mercedes will be equally dragged down. Why? The reason is that the two luxury cars mentioned above are heavily dependent on US factories in terms of production, and their US branches are also covered by China's "double taxation," so they can't escape.

According to an announcement issued by the Ministry of Commerce, 2.7% anti-dumping duties will be imposed on Mercedes-Benz U.S. International, levied at 2.0% on BMW Spartanburg, USA

Anti-dumping duties. Although the countervailing duty rates of both companies are 0%, anti-dumping duties will increase the price of products entering China, which will affect their sales.

Currently, BMW and Mercedes are exporting SUVs and other vehicles from U.S. factories. BMW is embarking on an expansion of its South Carolina plant capacity, which is planned to increase from 270,000 units/year in 2011 to 300,000 units/year. The plant produces SUV models such as the BMW X5, BMW X6 and BMW X3. Daimler-Benz plans to invest $2.4 billion in 2010-2014 to expand its Alabama factory and add equipment for the production of a Class C sedan. At present, the factory mainly produces Mercedes-Benz M-Class sedan, Mercedes-Benz GL-class SUV and R-class Wagon models. In 2010, the plant produced 125,400 vehicles.

In addition, non-US brands affected by the "double reaction" still have yangko, whose tax rate will increase by 4.1%. However, Wan Jian, the deputy general manager of Chengdu Yingge Airport Store, revealed that only the TL is produced in the United States, and the rest of the models are in Canada. Therefore, it is considered as “escaped” and the cost of TL is expected to increase by about 20,000 yuan.

The most "up" phase model (part)

Top Chrysler Jeep 6 Wanyuan Cadillac Escalade 300,000 yuan Acura 20,000 yuan <br> <br> News extension

What does "double taxation" bring?

Will accelerate the localization of imported cars from the United States

After the “double taxation” has been imposed, it is obviously unwise for the US Department of Imported Cars to pass the cost to consumers through price increases. From the import figures in the first three quarters of this year, the total amount of US car imports was no more than 15,000 vehicles, and the share was between 5% and 6%; the German and Japanese cars were the bulk, adding up to a share of 70. %about. At the same time, the US Department of Imported Vehicles is already in the position of a catcher, and Chrysler and Ford have only one imported car in the area. At this time, if prices rise again, it is equal to the share of this point.

In an interview with reporters, Cui Dongshu, deputy secretary-general of the All-China Federation of Fellowships, said: The introduction of double taxation may accelerate the speed of product introduction by Shanghai-based joint ventures such as Shanghai GM Cadillac and Changan Ford. At present, Shanghai GM has a rich product line, listing only 3 new cars this year alone, and preparing for the “double tax” levy in advance. Ford Motor Co., Ltd. has lost only a few imported cars. Only Chrysler has no production base in China, and plans to introduce the Chrysler brand to China next year after the JEEP brand. Therefore, there is news that Chrysler hopes to achieve "creativity" through a joint venture between Fiat and Guangzhou Automobile. This is indeed the situation. Forced.

News link

What is "double taxation"?

Double anti-tariffs are anti-dumping and countervailing duties. Anti-dumping refers to the boycott measures taken against the dumping of foreign goods in the domestic market. In general, foreign goods that are dumped are subject to general import duties, and additional taxes are added so that they cannot be sold at a low price. Such additional taxes are called "anti-dumping duties." Although the "General Agreement on Tariffs and Trade" clearly stipulates the anti-dumping problem, in practice, all countries in the world still act as one of the main means of trade warfare.

Anti-subsidy refers to the behavior and process of anti-dumping investigation agencies of a country in implementing and implementing countervailing regulations. The subsidy refers to the financial or financial incentives provided by a government or any public agency to its domestic producers or exporters, including cash subsidies or other preferential treatment, so that their products are not subsidized in the international market. The similar products are in a competitive position.

Stainless Steel Twill Weave Mesh

Stainless Steel Twill Weave Mesh is a kind of wire cloth product with flat and smooth mesh, uniform mesh, no deformation, good extensibility and abrasion resistance. Twill weave stainless steel mesh warp and weft threads interwoven from the adjacent strands - weaving in the direction of silk and shuttle.The movement of this upper and lower knitting is the movement of the shuttle.Twill weaving can be used to weave different specifications of mesh and mesh screen.

Material: 201, 304, 304 (L), 310, 316 (L), etc

Features: Features: stainless steel twill weave net is an acid, alkali resistant, high temperature, tensile and wear resistance strong product, has the filtering precision, the load strength high characteristics.

USES: Twill weave stainless steel mesh is widely used in aerospace, petroleum, chemical industry, scientific research and transportation, etc, used in acid, alkali environment conditions screening and filter, oil industry as mud mesh, chemical fiber industry as screen mesh, plating industry as pickling nets.


Extra tip: Stainless steel twill wire mesh gauge packaging must be strict, outer waterproof paper - moistureproof film - cushion film - cardboard packaging products in order to prevent wooden - damp impact in the transport process.


steel mesh woven wire mesh

The warp wire (D1) : all longitudinal braided lines.

The weft wire (D2) : all horizontal weaving lines.

Aperture (L1 and L2) : the distance between two meridians or two weft.

Mesh number:number of metal mesh holes per inch.

Thickness (T) : thickness of the net.

Specifications:

SPEC

WIRE DIAMETER

APERTURE

OPENING

RATE

WEIGHT(POUND)

INCH

MM

INCH

MM

200X200

.0021

.0533

.0029

.0737

33.6

6.2

250X250

.0016

.0406

.0024

.0610

36.0

4.4

270X270

.0016

.0406

.0021

.0533

32.2

4.7

300X300

.0051

.0381

.0018

.0457

29.7

3.04

325X325

.0014

.0356

.0017

.0432

30.0

4.40

400X400

.0010

.0254

.0015

.370

36.0

3.3

500X500

.0010

.0254

.0010

.0254

25.0

3.8

635X635

.0008

.0203

.0008

.0203

25.0

2.63

Products Photoes:

Stainless Steel Sieve



Stainless Steel Twill Weave Mesh,Stainless Steel Wire Cloth,Twill Weave Mesh,Stainless Mesh Wire

Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com