The collapse of a community gym in Tangshan, Hebei Province

Tangshan Village, Hebei Province, a community fitness park collapsed suddenly appeared 5 meters deep pit diesel generator | diesel generators price / 2010-08-02

On the 2nd, the reporter saw in the community of Caochangjie, Tangshan, Hebei. In the center of the fitness park, there is a pit about 5 meters deep. The diameter of the pit is about 3 meters. The staff of the Property Department of Diaoyutai Property Management Co., Ltd. at Caochang Street has set up a fence around Tai Hang, and used a construction waste to carry out a simple landfill of the subsidence area.
According to Zhang Guobin, property director of Caochangjie District, on July 28th, after learning that the community gymnasium had collapsed into a pit at about 7:00 pm on July 28th, the staff of the Property Management Department immediately commanded the maintenance of the piles in the collapsed pits, and they sought construction. The team will fill the pits to ensure the safety of residents in the community.
Wu Pushan, a former resident of the Qixin Cement Plant and a resident of the Caochang Street district, said that this was previously the train path that the Kailuan Bureau of Mines provided to Qixin to transport coal. The old man said that the pit had suddenly collapsed. At the time, he was at the scene. There were also residents living in the gym, but no one was injured.
In the past few days, there have been numerous collapses on the ground in Shijiazhuang, Xingtai, and Tangshan in Hebei Province. Some municipal staff explained that the collapsed surface may be caused by the destruction of underground facilities, or the long-term erosion and infiltration of the water in the nearby wells, and the damage to the sewage pipe network, which causes the fine sand below to be washed away by the sewage, resulting in underground voids. (Finish)
Next:Installation, use and regulation of marine diesel generator sets
Prev:Jiangsu Binhai, a car dropped into the water and caused two suspicious mistakes as the brake when the brake

To obtain perfect joins, inside of the solder ring copper  fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,Solder Ring Copper Fittings,presolder Copper Fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings

Solder Ring Copper Fittings

solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings

Taizhou Runde Company , https://www.zjpressfittings.com