Dielectric Constant Dielectric Loss Tester Repair

Dielectric constant dielectric loss tester maintenance 1. Newly-purchased equipment inspection Newly-purchased equipment is best able to use the LKI-2 inductor group first, to measure the Q value of each inductor at each different frequency, the test case, the inductor number used, the test frequency Q reading, the capacitance reading, etc. Multiple records and test environment conditions are recorded one by one in detail, and records are saved for reference during subsequent maintenance.

The LKI-2 inductor group is designed for use as an auxiliary inductor for testing, and these inductors cannot be viewed as high-precision standard inductors. With different test environment conditions, the measured Q and distributed capacitance of the inductor may be slightly different.

2. The use and maintenance of high-frequency Q-meter is a relatively precise impedance measurement instrument. In the rational use and attention to maintenance, it can ensure long-term stability and high test accuracy.

a. Be familiar with this manual and use the instrument correctly;

b. Keep the instrument clean and dry.

c. The warranty period of this instrument is 18 months. If mechanical failure or loss of accuracy is found, it can be sent back to the factory and repaired free of charge.

Warning Triangles

The Warning Triangles is a passive reflective item which is made of plastic reflective material. It can be folded and easy to carry! It's the necessary item for each vehicle! Each vehicle must carry the Warning Triangles, so as to encounter sudden failures. When we stop the vehicle and repair, we need to put the safety warning triangle 50 meters before and after the car, which can remind other vehicles to pay attention.

The Warning Triangles Product Features:
1. Vehicle triangle warning sign can be seen at a distance of a few hundred meters with the highest reflective performance. It can warn other vehicles coming from the rear.
2. When you drive your vehicle on the highway or general road, and have to park your vehicle, you should put the Warning Triangles on the back of your vehlcle 50-200 meters, away from danger.
3. When using the reflective safety triangle, you just need to prop up the triangles and button it up. The volume is very small when it is folded. You can put the triangle safety reflectors in the rear trunk. If you carry a safety warning triangle, you can have one more way to avoid danger.

Warning Triangles,Safety Warning Triangle,Vehicle Triangle Warning Sign,Triangle Safety Reflectors,Reflective Safety Triangle

Ningbo Best Way Auto Accessory Co., Ltd. , https://www.autoaccessorycn.com