The use of solid sample crusher and precautions
With the development of science, scientific research, production, and teaching departments must analyze some samples. It is very important to analyze the crushing process of the sample. The commonly used methods for preparing samples are: disk grinding, ball milling, grinding, or manual direct operation. Many processes, long periods, poor sample representation, and the need for tedious manual operations such as screening, are not suitable for modern industrial and agricultural production and scientific and technological development needs.
The method of using the solid sample crusher: Put the crushing object into the crushing room, cover it well, and turn on the power, that is, it can be crushed. After the crushing is completed, rotate the body upside down for another 2-3 seconds and the sample is left in the upper cover. , Open the cover and take out the sample. Before removing the sample, the power should be cut off to prevent the material from being blown out. Do not exceed 100 ml in one sample to avoid overheating or burning of the motor due to excessive load. Continuous use can be controlled within 3 minutes, intermittent 2 minutes, and then continue to use.
Solid sample crusher Note: When the sample is not crushed, the reamer should be removed to prevent the nut from loosening. The reamer and the cylinder collide when empty. Samples should be dry, dehydrated and then added to the crushing tank. Wet and strongly corroded samples should not be placed in the crushing tank. The crushing process is blocked by the amount of material, otherwise it cannot be crushed or can not reach the sizing particle size specified. In order to ensure the purity of the sample, you can use a little sample to crush the tank, and then formally crush the sample. In order to ensure the purity of the sample, remove a reamer and remove a small amount of sample remaining in the cylinder after each sample is processed, and then perform a second sample processing. When not in use, the crusher should be stored in a dry, dust-free, non-corrosive atmosphere to prevent corrosion.
The solid sample crusher is mainly used in industrial, agricultural, industrial and mining, medical and health, coal, geological and other scientific research units, and can smash all kinds of food, soil, medicine, sand and minerals.
This machine adopts once-through shaping technique, thus has high efficiency and excellent product quality. This machine set has such features as scientific and reasonable structure design, smooth and reliable running and convenient operation and maintenance. Fully absorbs domestic and foreign advanced technology, the reasonable cooling circulation water is to save resources and reduce the production cost. Alloy screw fromChinafamous brand ZhouShan is adopted special mixing function and high plasticizing capacity design, ensure good plasticizing, uniformity color and luster.
*Related Products:cast Stretch Film Machine,cast stretch film machinery.
Pictures
Films
1000MM Black Stretch Film Machine Unit,1000MM Hand Stretch Film Machine Unit,1000MM Plastic Stretch Film Machine Unit,1000MM Packaging Stretch Film Machine Unit
CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , https://www.clxmachinery.com