Analysis of the application of cutting steel door and window profiles

The plastic steel profile is made of polychlorohexene resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, ultraviolet absorbers, etc., and extruded. When cutting the steel profile, ensure proper feed speed; blunt serration or too fast feed rate will cause the incision defect; precisely adjust the blade angle to 45 degrees, the maximum angle error is 0.5 degree; strictly follow the given length limit The length error shall not exceed 0.5mm; the cut profile shall be placed with the incision facing down and the welding shall be completed within 48 hours to avoid excessive storage leading to contamination of the surface of the incision and affecting the quality of the welding. The feed rate and cutting speed of the drilling hole decrease with the increase of the drilling depth; the double-groove drill bit should be used for the hole diameter larger than 20mm, and the progressive lightening drill bit should be used for the hole with the diameter larger than 40mm.
Do not stretch excessively to insert any strip, and ensure that the length of the glue is about 2% longer than the length of the insert groove. The seal between the fan of the casement window is a length of glue around the circumference, and the joint should be on the upper side. Do not dock at the corner, let alone cut into several segments. The strip should be flat at the corner. The sealing strip of the press-fit glass should be cut and butted at a 45 degree angle to ensure that the length of the strip and the cutting angle are tightly joined. Color bonding at the strip interface for better sealing. Select the appropriate type of seal according to the thickness of the glass. The sealing strip must be completely grooved to ensure the sealing effect and the normal installation of the glass. Many connections are not allowed in the same tank.
The grade of the window not only includes a good looking appearance, but also a superior performance. Therefore, the plastic steel window can also take into consideration the beauty and high performance. Of course, the production technology of plastic steel window should be an organic collection of various technologies such as material selection, design, processing, human function, and aesthetics.
(Finish)

Feather Flag

Description :

Our feather flags is one kind of Beach Flags .Its shape like Knife or Feather ,or Aero ,Blade ,Mistral or Sirocco .

Our common material for feather flags is 100% 110 g or 135 g knitted fabric with digital printing or dye sublimation printing . Single side printing or double sides printing .

Our feather flags are supplied with a choice of bases, making them extremely versatile and easy to install ,in any position. Base choices include: water holding base ( for indoor or outdoor use ), ground stake ( for outdoor soft ground use) or a drive - on car foot ( for outdoor use on hard ground ).

Size list of our feather flags :

Glass Fibre Poles + Aluminum Poles

Rod total height

2.8 meter (9.2feet )

3.4meter (11.1feet )

4.5meter(14.77feet )

5.5meter (18.0feet )

Flag size

50*200cm

60*240cm

70*340cm

80*410cm

Vertical Height

260cm

300cm

400cm

500cm

Glass Fibre Rods

Rod total height

300CM (9.84 feet)

400CM (13.13ft)

500cm (16.4 feet)

Flag size

65*210cm

75*320cm

80*420 cm

Vertical Height from floor

280cm

360cm

450cm









Our Feather Flag Shape :

1. Feather Flag Convex


feather flags conves


2. Feather Flag Straight


feather flag straight


3. Feather Flags Concave :


feather flags concave


The difference between glass fibre poles + aluminum poles and full glass fibre rods :

The first one ,just the top part pole is gass fibre ,so it can be bent

The second one is full glass fibre rods from bottom to top .This quality is much better ,because this material is soft and can be bent

The printing tech for our feather flags :

1) Digital printing

2) Dye sublimation printing ( hot transfer printing ) --- this quality is much better than digital printing

The base for our feather flags to choose :


beach flag kits


For final price with complete accessories ,please contact with Angelina (whatsapp : 0086 13427921037 )

Feather Flags,Feather Banners,Feather Flag Banners,Feather Banner Flags

Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , https://www.advertisingflagbanners.com