· Beijing traffic management to carry out special operations to clean up "zombie cars"

The “zombie car” on the roadside not only occupies sidewalks and non-motorized roads, but also causes inconvenience to pedestrians and seriously affects the appearance of the city. From now on, in accordance with the overall deployment of the “Peace Action” carried out by the city, the municipal traffic control department will carry out the second wave of special rectification actions on the basis of strict initial results of the illegal activities involved in the law, focusing on rectifying the “zombie car” and illegal parking. Strong traffic violations, while cleaning up more than 300 "zombie cars" in the near future.
Yesterday morning, the traffic police dragged a zombie car on the sidewalk of Dongzhimenwai Street.
"F0, Benben, QQ monthly rent of 900 yuan, free of charge can be swiped." Such a red-and-white banner ad posted on a broken Alto car, the car engine cover is also placed with a pair of high heels. The "zombie car" that turned into a "billboard" stopped for several months on the pedestrian walkway on Dongzhimenwai Street, affecting citizens' travel. Yesterday, the civilian police of the Peaceful Traffic Brigade cleared the "zombie car" in the area.
Yesterday morning, the reporter saw the Alto in Dongzhimenwai Street. The car body was rusted and the front tires and headlights and license plates were gone. The most recent annual inspection mark is 2012. The police of the Peaceful Traffic Brigade introduced that a notice was posted a month ago and hoped that the owners would clean up themselves. However, there has been no movement so far. In order to avoid continuing to affect traffic, the police have cleared the vehicles.
"Zombie vehicles occupy people's access roads and non-motor vehicle lanes, and there are potential safety hazards, which may cause traffic accidents and affect the appearance of the city." The police said that if the vehicle is claimed during the period, the illegal parking will be fined 200 yuan. The claim will be disintegrated.
During the special rectification action, the traffic control department set up special posts in the transportation hubs of major avenues, train stations and airports in the city and the “three chaos” (security, traffic chaos, disorderly disorder) areas in the early stage, and set up special posts for the illegal rectification of illegal parking. . At the same time, more than 300 "zombie cars" that were recently touched were cleaned up one by one.
In addition, the traffic control department will continue to carry out night inspections and rectifications every day, and investigate and deal with illegal traffic violations such as drunk driving, licensing, red light driving, non-driver driving, etc., and continue to carry out consolidated management of illegal and illegally modified vehicles to ensure that no rebound occurs.
During this period, the traffic control department relied on the “one district, one police” mechanism to statically record the communities, roads, bustling entertainment venues and large toll parking lots where vehicles are gathered, investigate and use forged and altered motor vehicle number plates, and use other vehicle vehicles. Serious violations such as the number plate.
Since the launch of the “Ping An Action” at the end of June, the city has investigated and dealt with 74,000 traffic violations on the spot. Among them, 4,724 violations were involved in the law, 3,071 illegal acts of illegally modified cars, 262 illegal acts of drunk driving, 1710 deductions, and 76 detainees.

ABS Sheet Rod

HONY Plastic can provide ABS semi-finished profiles. ABS plastic sheets and bars produced by extrusion molding process can be used for machining. ABS plastic is an amorphous terpolymer made by combining three different compounds. The three components that make up ABS plastic are acrylonitrile, butadiene and styrene. Through different combinations of the three components, different types of ABS plastics can be manufactured, and different properties can be produced through branching or copolymerization. ABS material has a unique position and can be used as a bridge between general industrial plastics and other high-performance engineering plastics. It still has toughness and impact strength even at low temperatures, and the material has good stiffness and workability

Due to its thermal and mechanical properties, this amorphous material belongs to the polymer group of standard plastics. It has good heat resistance and high impact strength even at low temperatures.

The acrylonitrile-butadiene-styrene copolymer is hard, scratch-resistant, and has good dimensional stability. The continuous use temperature is between -50°C and +70°C. The material has high surface hardness, but is not UV stable. ABS is suitable for galvanized components

The corresponding HONY product brand of acrylonitrile-butadiene-styrene copolymer is HONY®ABS.

The forms of ABS products that HONY can provide include:

ABS sheet

ABS bar

Feature

High strength and stiffness

High surface hardness

High impact strength

High dimensional stability

Intolerant

Limited resistance to acids and alkalis

save costs

With natural color and black

Easy to bond

Resistant to gamma rays and X rays

Good machinability

Application

Usually in applications requiring high impact strength at low temperatures

modeling

Galvanized components

Toy tube, candle dummy

Electric wires for medical technology

Inclined tube pump body

Slide

Reactor shell

Mirror cover

Internal paneling

Handle element (automotive industry)

Housing parts in the electronics industry

Abs Engraved Sheet,Abs Smooth Sheet,Black Abs Plastic Sheeet,Plastic Abs Sheet

Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com