Do a good job of LED explosion-proof lamp maintenance to ensure safe use

Is it safe to use explosion-proof lights? I believe this is a subjective issue that is generally considered by many people. Many users will also consider such issues when choosing explosion-proof lamp dealers. In fact, the products produced by the regular explosion-proof light manufacturers are safe, reliable, and cost-effective, requiring the user to do well in the future to maintain and maintain the led explosion-proof lamps so that they can be used safely. This involves further professional maintenance. Problem.

In the installation of explosion-proof lighting must be determined firmly fixed, can not be free to replace the fastening bolts to ensure that the spring washer is complete, the sealing ring in the installation should be done waterproof and dustproof, usually when the LED explosion-proof lamp maintenance Should pay more attention. If you want to open explosion-proof lamps or lampshades, you should cut off the power automatically. Most of the explosion-proof lights provided by the interlock device is more complex, so there is a "strongly prohibited live open" warning in the obvious place. The explosion-proof fluorescent lamp has an interlock mechanism that opens and closes the power supply, which provides more safety and security for the maintenance work.

Led explosion-proof lamp maintenance work is very important, especially its explosion-proof joints need to be properly protected and must not be damaged. In the cleaning of the flameproof surface should be coated with phosphate paste or rust-proof oil, it is strictly forbidden to paint other paint. There shall be no rust layer on the flameproof surface. If there is slight rust, then it shall be ensured that there is no numbness after cleaning. If it is a dustproof and waterproof seal, it must be guaranteed. If the sealing ring is seriously damaged, it must be replaced with the same size and the same material sealing ring, if necessary, also need to replace the entire lamp, and check the lamp cover is in good condition.