Chen Bin, executive vice president of China Machinery Industry Federation, said on the 7th that China's machinery industry has been steadily consolidating in the first half of the year. The output of equipment related to environmental protection and pollution control, such as passenger cars and other products closely related to consumption, water quality pollution prevention equipment, etc., has grown rapidly, and the products related to smart manufacturing have grown well, and the industrial transformation has advanced to a deeper level. It is expected that the operation of the machinery industry will be stable throughout the year.
Chen Bin made the above statement at the press conference on the economic operation of the machinery industry in the first half of 2018 held by the China Machinery Industry Federation in Beijing on the 7th.
In the first half of the year, China's machinery industry promoted transformation and upgrading and the transformation of old and new kinetic energy, and the endogenous power of development gradually increased. The output of products that meet the consumption upgrade and industrial upgrading has grown significantly, the growth rate of fixed asset investment has rebounded, and new progress has been made in the localization of major equipment core components. However, insufficient demand is still the main problem that plagues the development of the industry. It is necessary to speed up the pace of transformation and increase the added value of the industry.
According to the key enterprises of the China Machinery Industry Federation, the company’s orders have shown a downward trend since 2018 after experiencing a rebound in 2017. In the first half of the year, China's machinery industry realized a total profit growth of 6.73% year-on-year, and the growth rate was lower than the national industrial average.
Chen Bin said that rising raw material prices and high cost pressures are the main factors in the profit of the extrusion machinery industry in the first half of the year. The task of improving the quality of the industry is still arduous. In the second half of the year, we will accelerate the pace of industrial restructuring and transformation, enhance the stability of industry development, and improve the level of economic efficiency.
The three control modes: one is all the operation control is completed by computer, computer engraving machine at work in the work of the state, unable to carry out other typesetting work, waste may be caused by the misoperation of the computer; two is the use of single-chip control, the engraving machine can work at the same time the layout, but not closed the computer, the computer can reduce the errors caused by the waste; three is the use of USB port data transmission system has more than 32M of memory, save the file to be completely separated from the computer, turn off the computer or other layout, can greatly improve the working efficiency.
Size machine of woodworking:
|
Model |
C5 |
|
Working Area (X*Y*Z) |
1300*2500*200mm (Optional) |
|
Structure for X Y Z axis |
Imported ball screw from Taiwan for Z axis , and High-precision helical rack for X and Y axis |
|
Max. traveling speed |
40000mm/min |
|
Max. working speed |
20000mm/min |
|
Peripheral |
Protective cover |
|
Auxiliary platform |
Automatic platforms for loading and unloading |
|
Spindle power |
6KW , 4.5KW air cooling spindle |
|
Spindle speed |
0-24000r/min |
|
Guide rail |
Original TBI from Taiwan(Optional) |
|
Driver |
Servo(Optional) |
|
Voltage |
AC380V/50HZ |
|
Run instructions |
G code*.u00*. Mug*.pelt |
|
Control system |
SYNTEC(Optional) |
Woodworking Machine,Cnc Woodworking Machine,Wood Router Cnc Machine,Wood Sculpture Machine
JINAN HT MACHINERY CO.,LTD , https://www.jncncrouter.com