Transmission detent parking hidden danger Ford China recalls two imported models


It was learned from the Defective Product Management Center of the State Market Supervision and Administration Bureau that a few days ago, Ford Motor Co., Ltd. (hereinafter referred to as Ford China) had filed a recall plan, due to the safety hazard of the transmission's parking pawl from May 18, 2018. , The recalled 2017 models were imported with one Ford F-150 Raptor model and the 2018 model with a Ford Mustang 2.3T performance model car.

召回，变速器,福特中国召回，福特F-150猛禽，福特野马

The reason for this recall is that due to the instability of the gearbox automatic assembly system, the insertion step of the parking pawl guide bushing on some of the affected vehicles may be omitted and not installed. If the transmission is repeatedly used in the event of missing pins, the parking function may be lost. Even if the gear and the dashboard indicate that the vehicle has been engaged in the P position, when the driver stops and stops, the instrument panel cannot warn that the vehicle is not correctly engaged in the P position. If parking brake is not applied, it may cause accidental movement of the vehicle in extreme cases, which may cause safety problems.

Ford China's authorized dealers will check the presence of vehicles within the scope of the recall of the transmission parking pawl guide bushings for defects, and install roll pins as needed to eliminate hidden dangers. Inventory vehicles will also be sold after eliminating hidden dangers.




The valve stem is an important part of the valve. It is used to drive, connect the actuating mechanism or handle, and directly drive the spool to move or rotate, so as to realize the function of valve switch or regulation.Valve stem in the valve opening and closing process is not only moving parts, stress components, but also seals. At the same time, it is subjected to the impact and corrosion of the medium, and it also causes friction with the packing. Therefore, in selecting the stem material, it must be guaranteed that it has sufficient strength at the prescribed temperature, good impact toughness, scratch resistance, corrosion resistance. The valve stem is a vulnerable part, and the mechanical performance and heat treatment performance of the material should be paid attention to when selecting.The valve stem in the valve opening and closing process, under tension, compression and torsion force, and direct contact with the media, as well as the relative motion between the friction and filler, so in the choice of stem material, must ensure that it provides adequate temperature strength, good impact toughness, abrasion resistance and corrosion resistance of.


Marine Valve Parts

Marine Valve Parts,Steel Marine Valve Parts,Marine Valves,Marine Ball Valves,Marine Spare Parts

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com