Many large companies will prepare one or two vehicles that will pick and choose the VIPs. The selection of vehicles for the VIP passengers must be very cautious. They must meet the needs of the company and match the company's image. The following small series recommended for everyone a suitable for the VIP passengers less than 19 seats - Yutong T7 high-end commercial vehicle (Deluxe Edition).
The body structure of the car is stamped and formed by the mold. Each part has a standard inspection tool for inspection. The accuracy of stamping parts is much higher than that of the skeleton. The fine control of the vehicle is very good. Designed dynamic tail. With the body is also a perfect fit, enhance the overall appearance of the vehicle. There is also a hidden outlet design, beautiful and generous, soft wind, to provide a comfortable ride for passengers.
In terms of driving, front and rear disc brakes used in the T7 commercial vehicle have good heat dissipation and long service life. The stability of the body can be maintained both on the highway and on the rugged mountain path. Moreover, it is the first stamped body product that passed the half load rollover test, and it passed the national standard one-time perfectly. The car is a tubeless tire, and even if it is suddenly punctured during driving, it will not be immediately deflated or punctured, and it will continue to drive for more than 30 kilometers without pulling out the prick after piercing. In the driver's door and passengers are equipped with an alarm system to remind officers and passengers to effectively reduce the incidence of accidents. In the reversing safety performance, the advanced corridor-type beam technology is adopted, four wide-angle probes are installed, and the horizontal detection angle reaches 110 degrees. The rear obstacles are detected, and most non-threatening targets are shielded and effectively reduced. False positives.
The key point is to talk about the interior design of the car. The car has advantages in terms of space. In addition to all the front suspensions, the suspension has a 30% lower stiffness rating than traditional cars, and damper damping. 35% lower than traditional cars, effectively improving the overall vehicle comfort. There is also a seat design that is based on a person's body structure design. The package is higher than the average seat, can effectively support the waist, reducing the fatigue of the ride. An air purifier is also installed at the rear of the roof to keep fresh air inside. For the VIP car, there must be something to talk about in the car. If the car's engine noise is too loud, it will not be good. This car satisfies this demand precisely. The noise in the idling car is reduced to 46.9 decibels, providing passengers with a good environment.
Yutong as an old brand is still worthy of everyone's trust, and before the launch of the T7 this car has passed many authoritative tests, and also went to Tibet through the plateau test, the performance of safety is beyond doubt. In terms of appearance and interiors, it is considered to be the current high-end commercial vehicle in China, so Xiao Bian thinks that this 19-seat coach is suitable for the company's transfer of VIP passengers.
Tongxing's most advanced products of copper aluminum fin type condenser and evaporator, which have already been widely used in Commercial Refrigeration area- freezer, beverage machine, display cases etc.. High heat exchange efficiency, automatic process production line, mechanical welding arm, high standard internal cleaness , over 20 models production line, tube pipe covers ( Ñ„5mm, Ñ„6mm, Ñ„7mm, Ñ„7.94mm, Ñ„9.52mm , Ñ„12.7mm.Ñ„15.88mm )
Copper Aluminum Heat Exchanger
Copper Aluminum Heat Exchanger,Copper Tube Heat Exchanger,Ice Maker Copper Condenser,Display Cabinet Copper Condenser Coil
Zhejiang Tongxing Technology Co., Ltd. , http://www.zjtx-heatexchangers.com